Precision incubator

                    Precision incubator

1. Product Name: Precision incubator

2.Product Model:SM-BPH-9042、SM-BPH-9082、SM-BPH-9162、SM-BPH-92

3.Product features:

Humanization design

Large screen LCD display, menu type operation interface, easy to observe and operate

The use of mirror stainless steel liner, four corners of the semi-circular transition, shelves can be free loading and unloading, easy to clean the studio.

Unique air duct circulation system to ensure the studio temperature uniformity. The right side of the box with a diameter of 25mm test hole, according to the placement of the required arbitrary wiring.

Quality assurance

Fuzzy PID controller, the temperature control precision fluctuation is small, with timing function, the time maximum setting is 99 hours 59 minutes.

Multi-stage programmable control, can simplify the complex test process, and truly achieve automatic control and operation. (Optional)

Automatic control of circulating fan speed

 The speed of the circulating fan can be automatically controlled. When the temperature inside the box is in constant temperature, the speed will be reduced and the circulating wind speed will be adjusted to the wind speed suitable for the growth of the cells. This will avoid the volatilization of the sample due to excessive air flow during the test.

Self-diagnosis function

When the incubator fails, the LCD screen will be faulty information, run the fault point at a glance.

Convenient data processing (optional)

Can be connected to the printer or 485 communication interface, with USB data transfer interface (U disk) with computers and printers to record temperature and time curve for the test process data storage and playback to provide a strong guarantee.

Safety function

Independent temperature limit alarm system, and sound and light alarm prompts the operator to ensure safe operation without accidents. (Optional)

High or low temperature and over temperature alarm.

Multi-segment programmable controller

Multi-stage LCD programmable controller, a variety of parameters a screen display, menu-based interface, you can simplify the complex test process, the real automatic control and operation.

Multi-stage temperature, circulating wind speed, time and heating rate and other parameters can be set and programmed at the same time, you can carry out the temperature rise of the gradient control, the initial temperature from the box slowly warming and other functions can also be preset automatic start, standby and shutdown functions.

Can be preset 7 groups of 63 steps programmable, each group of 9 steps, each set of time 1 to 99 hours 59 minutes.

UV sterilization system (optional)

      The interior of the box can be disinfected regularly, the utility model can effectively kill the floating bacteria in the circulating air of the chamber body, thereby effectively preventing the pollution during the cell culture

4. Technical Parameters

The performance parameters are tested under no load condition: ambient temperature is 20℃, and ambient humidity is 50%RH